Sometimes a project just pushes to the front of your queue.


Like this, Pikachu hoodie, made for a young friend of mine, which I’m pretty sure is made from the same bolt of fleece fabric as the Pikachu doorstop.

I just found out the pattern I traced for The Boy a couple of years ago.


Cut the patch pocket from the leftovers.


Added a hem band cos I seem to be kind of addicted to them at the moment and I finally got the thumbhole cuffs to work!


I used the wrong side of the last scraps from some trousers I made for The Boy to make applique stripes on the back and for the base of the tail too. This tail was a pain to turn as the end was way bigger than the opening.  But I did the right thing cos according to Customer Feedback this is a male Pikachu tail (phew).


There’s a press stud holding the tail in place so that you can wear it up or down.


The face is appliqued on too (lets just ignore the fact that I really should’ve interfaced those cheeks before sewing them on) and the ears hang down. The hood front is finished with jersey bias binding, one of my new favourite sewing things, and matches the black finish on the cuffs and hem (so much more practical than yellow in those areas don’t you think).

Here it is on my in house model before being hand delivered to it’s new home.  Where I am reliably informed it’s proud new owner is now fast asleep in bed still wearing it.

Now, to get back to the To Do List…

T shirt twins.

Question, what to do with the rest of the fabric from the Halfblood Headbands?

Answer, dig out a t shirt pattern, cut out the parts for a red and a black t shirt, and mix them up!

If you happen to have misfiled the instructions for said pattern, search out a handy v neck tutorial and maybe Kelly’s thumbhole cuff tutorial too.  Oh and add a hem band too.

Use any left over fabric to facilitate some more Cabin 9 themed reverse applique, et voila. (You have to imagine the black thumbhole cuffs, they would’ve been great, but I fluffed it up, and when I tried to unpick them the fabric ripped and I didn’t have a big enough piece left to recut).

Two matching, yet different, t shirts. For two friends.  (No, this one didn’t end up with thumbhole cuffs either, I was interrupted by arguing children so many times whilst trying to cut them out that I accidentally forgot to cut the pattern piece on the fold and didn’t have enough fabric left to recut, so you’ll have to imagine the red cuffs.)


With thanks to LSH for his design input and drafting help.


One to give away.  (Apparently the t-shirt is just his style. The headband was a bit more of an alien concept. )


And one to keep.

Halfblood Headbands

So, I got given a brief for a birthday present for The Boy to give to his friend.  Something along the lines of* “A hairband, like you make me, because I saw his hair flopping in his eyes, black with a red or orange flame on it like the one on his t shirt”.

Quick background info here to get you up to speed if you don’t already know. There is an author, called Rick Riorden, who writes, amongst other things, retellings of Greek myths set in current day USA, featuring teenage demi-gods. Said teenagers hang out together at Camp Halfblood, which is basically an American summer camp for demi-gods, where the cabin they sleep in is determined by their godly parent. Some clever person(s), who clearly realised just how popular the books and films are, sells all manner of Camp Halfblood related t shirts, including t shirts for Cabin 9, where the children of Hephaestus (the god of blacksmiths and fire) sleep. Some of these have a flame design on. That was there “flame” part of my brief came from.

Whilst searching for said flame, I noticed that a lot of the Cabin 9 stuff had cogs on, which I thought surely easier to reproduce than flames, albeit not in the brief. Presumably the cogs are something to do with the fact that Leonidas “Leo” Valdez (favourite of the birthday boy) resides there, he is, as I’m sure you know, quite good at making things.

So, next up, how to get a design onto a headband. I discounted fabric paint (painting on to black, tricky), hand embroidery (not my forte), or using a zig zag stitch to embroider the fabric (looks a bit scruffy imho), and thinking about the fact that headbands work best when lined, I settled upon reverse applique to create my design.


First up, a test headband. The idea was to use scraps I had lying around and a simple design, so I ended up with a green trident on a blue background (for children of Poseidon, such as my sons favourite Percy, resident of cabin 3 obviously).  It was deemed acceptable, although it was pointed out to me that the fact the green fabric was lighter weight than the blue was not ideal.

For the real deal, I bought a metre each of some ponte-esque thickish knit in red and back, which is a bit nasty and synthetic TBH, but I didn’t have a lot to choose from.

Wanna make your own camp halfblood headband?  First cut two rectangles of 2 contrasting colours of knit fabric (preferably of similar weight) – exact size depends on your head size and how stretchy the fabric is, hopefully you have a helpful headband to copy, but if in doubt, try 90% of your head circumference + seam allowance.

Sew right sides together, along long edges, turn and press. Then trace out your design, it needs to be “fat”, as you’ll be cutting away to reveal the colour underneath. In my example the lines of the design are sewn as parallel lines (well, parallelish, cut me some slack, it’s all wiggly wavy!). Then, cut away on the right side to reveal your design beneath.

Then pin the right sides of one of the short edges together, being careful to match up the seams top and bottom. I pinned the red short sides together. Start sewing a little way before, so on the black for me, and end a little way after. So, I have the red side sewn together and the top and bottom of the black side. Then finish the remaining hole by hand.


And voila, a camp half blood headband.

Of course, if you’re a glutton for punishment, you can make the headband reversible by repeating the process on the other side before sewing the short ends up. (I centred each of my designs 1/4 way in from the edge, so whichever on is at the front, the other is at the back, as the seam lines show through to the other side.)  Turns out that cogs are at least as tricky as flames to sew (and trying to do both is just a silly idea).

Then repeat, so your son can keep one and give one away. (There are two honest, the second one even has a slightly more elaborate cog, I just forgot to take a photo of them side by side.)

Clearly, the headbands didn’t take 1m of fabric each. So, watch this space for what I did with the rest….


*it was a few weeks ago now, I may not be quoting accurately.

A tale of two cushions

Once upon a time, a long long time ago, a young couple finally could afford to buy themselves a bed after a couple of years of sleeping on a futon mattress on the floor. They bought a lovely, well crafted, classic iron bedframe that they’d been wanting to get for years. When it came it was as lovely as they hoped, unless they wanted to sit up in bed and read/drink coffee/do anything that involved resting your back upon the classic, cold, hard, angular iron, which proved to be really uncomfortable.


So one of them decided to make a couple of cushions to alleviate that problem. Colour schemes were discussed, the fabric was bought, the first cushion was made.  And they started using it straight away, taking it in turns to be able to sit up comfortably in bed, until the second cushion was finished.


Years passed.

The other one dropped a hint about the second cushion.

More years passed.

Finally the one that does most of the sewing decided to use Valentines Day as a deadline to finish the second cushion. A few days before hand the fabric was pressed, measured, cut out and the sewing started.


Then it was actually valentines day and still the cushion wasn’t finished. So she got up, brought the other one (who had to go to work) a cup of coffee in bed, got back into bed herself and promptly fell asleep again, safe in the knowledge that they didn’t really do Valentines Day anymore so a cup of coffee definitely put her ahead of the game.


Later, some time after she got up, she found a bottle of wine and a home made card on the bedside table and thought “b***er”.


That evening, she finally, just about, finished the second cushion – complete with hapazardly sewn on hanging loop fasteney things (it had been a long day) and she attached it to the bed to be found by her beloved at bedtime. Which should still be Valentines Day, at least.  One day she will add loops to the first cushion too. But first it needs a wash. And she needs to buy more velcro.




Lumps and Bumps

So, I have been continuing to practice my Tunisian crochet.


When my ball of yarn was nearly finished, I finally figured out that I’d been doing it a bit wrong. Tunisian crochet is worked with a forward pass (right to left, if you’re right handed like me, this is where you pick up stitches) and a return pass (left to right, where you basically cast of the stitches you picked up). I had been following the return pass instructions “chain one, chain through 2, repeat to end” and had interpreted them as “[chain one, chain through 2] repeat to end” whereas in actual fact they are “chain one, [chain through 2] repeat to end”. So I had basically been doing an extra chain between each stitch, which explains why there were these excess bits poking through. The right hand side of the pic shows the proper way of doing it.


Anyways,  I finished the ball of yarn. I had originally intended to make a couple of squares and sew them together to be a pot holder, but Long Suffering Husband was rather taken with this yarn and said it was too nice for that. However, as a bargin bin end of shop stock yarn shop purchase, I only had one ball of it. So LSH petitioned for a circular scarf.

I did warn him that it was rather lumpy and bumpy, but he replied that he was rather lumpy and bumpy too, so he didn’t mind. Here he is demonstrating the versatility of said scarf.



This Tuesday, The Girls year at school will be having a Greek Day. Which is going to involve “a carousel of activities throughout the day” (your guess is as good as mine), a Greek feast (we’re signed up to take in a jar of black olives), and instead of school uniform they “may come dressed in Greek attire (a sheet!)”. Ha.  After extensive research (half an hour sat on the sofa using internet search engines) I decided that to be a Greek in a Sheet, you need for a minimum two seperate bits of sheet that you can pin together at your neckline.


Sewing together seemed more secure though. So, here is the Chiton (pronounced Ki-ton, as in “I’ve got a kite on”, well as far as I can tell, I’m no ancient Greek expert), which is indeed made from a part of a sheet that  I never used (the rest is now in the stash) and a bit of appropriate looking ribbon that was lurking in my ribbon box.  It may, or may not, be a Doric Chiton, but it definitely didn’t cost $45. And the belt is included, the middle of it is even sewn in place at the back, to prevent it from getting lost.


The drapey over thingy is apparently a Diplax, as shown here and is just a hemmed bit of nasty synthetic fabric that I’m not even sure how I acquired which I’ve pinned up with safety pins (on the inside, cos they’re not so authentic).  I’m really glad I found Serial Hobbyist Girl’s post because it gave me the confidence to go with not white and I reckon the Diplax really makes the costume.


Family Photo Upon Arrival

It actually got called into service before Greek Day, as we all went to a Mythical Themed Ceilidh yesterday. Turns out Greek costume (and simple vaguely Greek style hairdo) plus stuffed owl toy is perfect for being Athena. Bonus. The Boy on the other hand wore a fairly normal combination of his own clothes, plus made himself a copy of Mjolnir and hey presto, he was Thor. Long Suffering Husband kept up the father/son thing and went as Odin, in Travelling Stranger Mode, complete with labelled origami ravens and a bandage over his “missing” eye made with conveniently see through muslin that our christmas pudding came wrapped in.


Action shot where you can sort of see the skirt and possible the tail. (I managed one dance before abandoning the mask. A fellow dancer was apparently stabbed in the armpit!)

That left me. Originally I had great plans to use this as motivation to finally make the gabriola skirt up in blood splatter effect denim, which is surely the basis of a great costume, but I didn’t get around to it in time. So, this is my last minute unicorn costume, cos if you already have a 3D unicorn mask lying around the house (from World Book Day 2017) it’d be a shame not to use it, right? Except being made for my daughter the mask didn’t actually fit me, so I had it pinned on top of my head instead. I quickly ran up a waistcoat out of cream fleecey/fake fur stuff. And then went a bit mad and started a muslin of the Gabriola skirt at 4pm on the day we were going out at 7.30pm (with break for cooking and eating dinner).  I used the white reverse side of some curtain fabric. To say it was rough and ready would be generous. I didn’t realise until after I started that I didn’t have all the pattern pieces printed. And then I found out I didn’t have enough fabric. So, this is the gabriola yokes, front and side and a random bit of the right size at the top sort of rectangular bit of fabric at the back, no waistband, rough and ready zip, and then a kilt pin  holding it in place. Oh and some netting strips being a tail. By the end of the night I needed to change into my emergency jeans as part of the seam had come undone at hip height. But I’m counting it as enough of a fitting muslin to mean I can go ahead and try it in my real fabric, I think the size is good enough to just need minor tweaks and it’s definitely a good skirt for dancing in.

So, maybe this year I will actually finish and Gabriola, or two. Only time will tell.  (I have given up making pledges, my soul dies a little every time I break one.)