Carry on Cahoning (bag Part 2)

So, if you have a cahon that needs carrying and have prepped your fabric, next you need a plan, right?

IMG_0079

My orginal plan was quite literally back of the envelope. The zip down front, for easy cahon insertion and removal, rucksack straps and quilting all stayed. The pocket got ditched (the cahon is so bulky you really don’t want any extra sticky-outiness) as did the idea for a drawstring top and fold over flap. After much musing I decided that drawstring tops and zip down front are inherantly incompatible.

IMG_0085

My bag consists of a squarish base piece, a front piece, a main piece that wraps around the other 3 sides and a lid. After cutting my pieces to size, I sewed the zippers onto my front piece. These are separating zippers, because that was my only option locally, later I hand stitched just above the base to make them into non separating zippers.  The wrong side where the zipper is attached to the bag is is bound with some extra wide bias binding.

Next it was time to attach the other side of the zip to the main piece. As I happened to have the salvaged fabric from an abandoned broken tent lying around (as you do), I cut off some strips (already with one edge bound in black) and used them to make a facing for my zip to help keep the rain out that handily bind my raw edges at the same time.  I sewed the zip to the right side of my main piece (teeth pointing inwards), then flipped the fabric over and sewed the facing to the back (aligning the raw edges). Then I folded the zip so the teeth were now pointing outwards and my raw seam allowance was at the back, flipped my facing over my seam alowance, covering my zip, flipped back to the front side and topstitched everything into place. (Nope, I didn’t pin either. #sewingdangerously).

IMG_0098

Then the front and main pieces were sewn to the base. The same pale green extra wide bias binding that you can see is also used to bind all the raw edges on the inside seams. There is also a flap of tent fabric at the bottom too, for extra weather proofness.  (Sorry, I have completely failed to take a decent photo of it, you’ll have to use your imagination).

Once the main bag was assembled, onto the straps. I wanted them quilted, to add padding, so rather than sew a tube and turn it, I pressed a centre fold into my strap piece, pressed the seam allowances, quilted some batting in place, attached the webbing to the bottom, folded it up and topstitched everything in place.

IMG_0175

Then I could baste the straps in place to try them out. At this point there is a grab handle in between them at the back, that later got moved. Oh, and I should mention that the bottom of the adjustable straps had already been sewn in place when the main piece was sewn tot he base. (And those sliders are reclaimed, all rucksacks die eventually and when mine do I salvage all those bits and put them in by Box of Useful Bag Bits. Those things are really expensive if you buy them new!).

IMG_0199

Last up the lid, which is sewn into place on three sides and then has a flap that goes over the front. It doesn’t need to lift off, as the whole front unzips. I used more tent salvage to bind the top of the front piece and the flap of the lid before sewing the lid in place.

The lid fastens in place with a magnetic bag clasp (this I did  buy new). I managed to get one part into the facing of the flap before sewing it down, (with a little rectangle of fleece offcut for extra stability), but for the bag front I attached it to a patch of denim and sewed it in place.  I didn’t fancy trying to get the clasp through the quilted front, and if I did I was worried that the holes would fray. (The patch has some classy red nail varnish acting as fray stop, which you can just make out around the clasp. Oh well.)

IMG_0201

The grab handle is some ribbon threaded through another reclaimed bag bit and sewn across the centre of the lid. I thought this would be more stable for lifting a bulky item like a cahon than a loop behind the straps on the back.

So now, finally, months after I started, LSH has a bag for his cahon. Woot woot. I will try and get you an action shot update once dance out season is underway.

Of course, as soon as a certain someone saw the cahon in its bag he had to put it on his back. I foolishly mentioned that it was nearly as big as him, and so he had to test it out.  He’s just slightly too big to have it zipped up.

Now this monumental project is finished I’m not sure what to do next. Something simple to clense my palate maybe.  In the meantime, I may just stare at it a little more….

3 thoughts on “Carry on Cahoning (bag Part 2)

  1. Pingback: Phone cover – Prolific Project Starter

  2. I still can’t believe you just winged it and ended up with a fabulous bag.. It was so much work!! LSH better love it. 🙂

    • If I’d’ve realised at the start how much work it was going to involve I might not have done it. But I’m really pleased, it came out well and I learnt some new stuff. (Plus it seems like the cahon now lives in the bag in our living room, not sure when that happened, anyway the fact it’s pretty helps!)

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s