Carry on Cahoning (bag Part 2)

So, if you have a cahon that needs carrying and have prepped your fabric, next you need a plan, right?

IMG_0079

My orginal plan was quite literally back of the envelope. The zip down front, for easy cahon insertion and removal, rucksack straps and quilting all stayed. The pocket got ditched (the cahon is so bulky you really don’t want any extra sticky-outiness) as did the idea for a drawstring top and fold over flap. After much musing I decided that drawstring tops and zip down front are inherantly incompatible.

IMG_0085

My bag consists of a squarish base piece, a front piece, a main piece that wraps around the other 3 sides and a lid. After cutting my pieces to size, I sewed the zippers onto my front piece. These are separating zippers, because that was my only option locally, later I hand stitched just above the base to make them into non separating zippers.  The wrong side where the zipper is attached to the bag is is bound with some extra wide bias binding.

Next it was time to attach the other side of the zip to the main piece. As I happened to have the salvaged fabric from an abandoned broken tent lying around (as you do), I cut off some strips (already with one edge bound in black) and used them to make a facing for my zip to help keep the rain out that handily bind my raw edges at the same time.  I sewed the zip to the right side of my main piece (teeth pointing inwards), then flipped the fabric over and sewed the facing to the back (aligning the raw edges). Then I folded the zip so the teeth were now pointing outwards and my raw seam allowance was at the back, flipped my facing over my seam alowance, covering my zip, flipped back to the front side and topstitched everything into place. (Nope, I didn’t pin either. #sewingdangerously).

IMG_0098

Then the front and main pieces were sewn to the base. The same pale green extra wide bias binding that you can see is also used to bind all the raw edges on the inside seams. There is also a flap of tent fabric at the bottom too, for extra weather proofness.  (Sorry, I have completely failed to take a decent photo of it, you’ll have to use your imagination).

Once the main bag was assembled, onto the straps. I wanted them quilted, to add padding, so rather than sew a tube and turn it, I pressed a centre fold into my strap piece, pressed the seam allowances, quilted some batting in place, attached the webbing to the bottom, folded it up and topstitched everything in place.

IMG_0175

Then I could baste the straps in place to try them out. At this point there is a grab handle in between them at the back, that later got moved. Oh, and I should mention that the bottom of the adjustable straps had already been sewn in place when the main piece was sewn tot he base. (And those sliders are reclaimed, all rucksacks die eventually and when mine do I salvage all those bits and put them in by Box of Useful Bag Bits. Those things are really expensive if you buy them new!).

IMG_0199

Last up the lid, which is sewn into place on three sides and then has a flap that goes over the front. It doesn’t need to lift off, as the whole front unzips. I used more tent salvage to bind the top of the front piece and the flap of the lid before sewing the lid in place.

The lid fastens in place with a magnetic bag clasp (this I did  buy new). I managed to get one part into the facing of the flap before sewing it down, (with a little rectangle of fleece offcut for extra stability), but for the bag front I attached it to a patch of denim and sewed it in place.  I didn’t fancy trying to get the clasp through the quilted front, and if I did I was worried that the holes would fray. (The patch has some classy red nail varnish acting as fray stop, which you can just make out around the clasp. Oh well.)

IMG_0201

The grab handle is some ribbon threaded through another reclaimed bag bit and sewn across the centre of the lid. I thought this would be more stable for lifting a bulky item like a cahon than a loop behind the straps on the back.

So now, finally, months after I started, LSH has a bag for his cahon. Woot woot. I will try and get you an action shot update once dance out season is underway.

Of course, as soon as a certain someone saw the cahon in its bag he had to put it on his back. I foolishly mentioned that it was nearly as big as him, and so he had to test it out.  He’s just slightly too big to have it zipped up.

Now this monumental project is finished I’m not sure what to do next. Something simple to clense my palate maybe.  In the meantime, I may just stare at it a little more….

Cahon Carrying – Part 1

“What is a cahon?” I hear you cry.   It’s a box that you sit on and drum with a hole on one side.

IMG_0042

A cahon can also double up nicely as a seat/table when camping. Can you spot it?

How do I know this? Cos last year Long Suffering Husband (LSH) bought one because even though I have manage to severely curb his string instrument purchases he is still addicted to buying instruments for Essential Morris Dancing Reasons (EMDR).

It flat packs, for easy carrying. I even found LSH a tote bag we already had to put it in (one made by yours truly way back when).

But life in our household is never that simple. Next up LSH acquired a foot pedal for said cahon (an essential accessory for all those who want to Drum ‘N Strum). And then he decided he needed to carry his amp around too. The amp will fit inside the cahon, but not in the bag alongside the cahon. So, the need for a specialist cahon bag was established. And that is when the fun started. ..

First up, the fabric. Good little stashbuster that I am, I suggested that I use a denim from my stash that I bought online yonks ago and never used, as when it came it wasn’t quite expected. One side is orange, one side is yellow, both quite in your face kind of shades. My thought was that the orange side would show the dirt less, but LSH preferred the yellow, because EMDR meant the ideal colour for the bag was green, and yellow was closer to that.

In the end I screen printed it, due to mental wincing at how much a light yellow bag would show up the dirt. First with green squares (the screen from the boys trousers), and then with leaves over the top (oak leaves would’ve been better, but the sycamore screen I had was deemed acceptable and suitable autumnal colours were approved).

Next up, high on my previous quilting success (and with the left over batting burning a hole in my stash, plus some left over burgndy polycotton, which was ok’d for the inside), I decided to quilt it. First the base (which I didn’t bother to screenprint cos it will hardly be on show much). It came out quite nicely, if I do say so myself, with a grid of inch squares mimicing the squares screen.

Then, I waxed it, to make it more weather proof. Thread Theory have blogged several times about Otter Wax. I was intrigued and this seemed the project to try it out on.  I couldn’t get Otter Wax in the UK so I used Greenland Wax instead, as it seemed to be very similar and surely Greenlanders must know a thing or two about making things water proof? The whole family had fun using a hairdryer to melt it into the fabric (we really know how to have fun in our house) and then dropping water on it to check out how well it worked. (That last pic, bottom right, shows the difference between untreated and treated fabric, impressive eh).

And then I tried to quilt much larger piece that would be the sides. Despite basting it in place all properly, it started slipping and my lines wouldn’t stay straight and Morris Dance Out Season (yes, there are seasons, like in Sportsing, they dtend to practice in the winter and inflict themselves on entertain the public in the summer months) was over, so it got Put On One Side.

Some time later, when LSH requested it be finished for his birthday, it got mentally moved up the To Do List When he started complaining about having to lug the cahon to and from practices dropping hints about Buying A Cahon Bag, I a) cursed him for fooling me into making one when you could buy one and b) resolved to finish this one so as to not have wasted all the effort so far. I didn’t quite manage it for his birthday, but close enough.

Anyway, for Quilting Attmept 2, with a fresh pair of eyes after several months break, I decided to ditch the regular squares, that made any deviation from the plan show up as a glaring mistake,  and instead adopted a more random approach, which I called “aim for the biggest gap” and that took the pressure off. I also took the executive decision to ignore any creases that had been sewn into the fabric. So don’t show this post to any Proper Quilters.  Finally, some shoulder aching time later it was done. Well, except for the bit when I realised I didn’t have enough fabric prepped for the top and had to print, wax and quilt another bit of cloth. Which, with practice under my belt and a smaller piece of fabric, came out much better, but left me resolved Never To Quilt Again.

Next up, an exciting How The Bag Was Made From the Painstakingly Prepared Fabric post. Bet your excited now, eh?